ADVANCED OPERATIONS SECTION

Automatic Playlist Playback

This function allows previously selected playlist to be selected and automatic playback to commence in the order by which the tracks are recorded, alternating between controllers A and B.

1Press the MIX button.

The MIX screen appears in the center display.

2Rotate the rotary selector dial to select a playlist, then press the select down () button to open the playlist.

The opened playlist will be selected for MIX.

3Select the desired MIX mode

Use the function buttons to select the MIX mode.

If none of the mix modes is selected, one of the four modes will be automatically selected at random.

4Rotate the rotary selector dial, and load the first track of the playlist to controller A, the second track to controller B, and set to cue standby.

The tracks will be loaded in controllers A/B, and the unit will enter the cue standby mode.

MEMO

•If no tracks are set in controllers A/B, they will be set automatically in step 5.

5Press the [AUTO MIX] function button to set to ON.

If no track is loaded, the playlist’s first track will be set on controller A, the second track on controller B, and both set to cue standby.

6Press the play/pause () button for controller A.

The track loaded on controller A will begin playback, and AUTO MIX will begin.

Thirty seconds before the end of playback, playback will switch to the track set in controller B, using the selected MIX mode.

MEMO

•The instant change function can be used if desired to switch playback even while a track is still playing.

7Press the [BPM SYNC] function button to set to ON.

Set BPM SYNC to ON if you wish to synchronize the tempos of successive tracks.

MEMO

•During auto play, you can interrupt the playback order by using the BROWSE screen to load a track into the standby controller.

ABOUT FADER START PLAY

When the accessory control cord is used to connect this unit’s CONTROL jack to the CONTROL jack of a Pioneer DJ mixer, when the DJ mixer’s channel fader lever is raised, the player’s CUE standby mode is released and playback begins immediately. The player’s fader start can also be performed by operating the cross fader lever.

Also, the player can be returned to the cue point (back cue operation) by returning the fader lever to its original position (except during auto play).

44

En