
Preparation
Installing the Plasma Display
Over 50 cm
Over 10 cm
Location
•Avoid direct sunlight. Maintain adequate ventilation.
•The length of the system cable used to connect the Plasma Display and the Media Receiver is about 3 m.
•Because the Plasma Display is heavy, be sure to have someone help you when moving it.
CAUTION
•If you place anything on the top of the Media Receiver, it will not receive enough ventilation and will not operate properly.
NOTE
•Allow enough space around the upper and back parts when installing to ensure adequate ventilation of the rear of the unit.
Using the optional PIONEER stand
For details on installation, refer to the instruction manual supplied with the stand.
Using the optional PIONEER speakers
For details on installation, refer to the instruction manual supplied with the speaker.
05
Installing the Media Receiver
Plasma Display | English |
|
Media Receiver
System cable (approx. 3 m)
CAUTION
•Do not place a VCR or any other device on the top of the Media Receiver.
•When installing, allow enough space on the sides and above the Media Receiver.
•Do not block the side ventilation opening or the rear exhaust opening of the Media Receiver.
Over 5 cm
Over 5 cm | Over 5 cm |
Ventilation
opening
Over 10 cm
Exhaust |
opening |
CAUTION
Placing the Media Receiver alone in the vertical position can result in product damage and malfunction.
CAUTION
Operating Environment
Operating environment temperature and humidity:
+0 ºC – +40 ºC; less than 85 %RH (cooling vents not blocked) Do not install this unit in a poorly ventilated area, or in locations exposed to high humidity or direct sunlight (or strong artificial light)
15
En