Basic Adjustment Settings
Power Control
Power Control provides convenient functions for power saving.
Energy Save
You may use one of the three Energy Save modes to save power consumption.
1Press HOME MENU.
2Select “Power Control” (
/
then ENTER).
3Select “Energy Save” (
/
then ENTER).
4Select “Save1”, “Save 2”, or “Picture Off” (
/
then
ENTER).
Item | Description |
Standard | Does not decrease the picture brightness. |
|
|
Save1 | Slightly lowers power consumption while |
| slightly suppressing the brightness drop level. |
|
|
Save2 | Decreases the picture brightness and lowers |
| power consumption. |
|
|
Picture Off | Deactivates the screen to save power. To restore |
| the screen display, press any button other than |
| i+/i– and e. |
| This setting is not memorised by the system. |
5Press HOME MENU to exit the menu.
No Signal off
The system will be automatically placed into the standby mode if no signal is received for 15 minutes.
1Press HOME MENU.
2Select “Power Control” (
/
then ENTER).
3Select “No Signal off” (
/
then ENTER).
4Select “Enable” (
/
then ENTER).
Item | Description |
Disable | Does not place the system into the standby |
(factory default) | mode. |
|
|
Enable | Places the system into the standby mode if no |
| signal is received for 15 minutes. |
5Press HOME MENU to exit the menu.
NOTE
•Five minutes before the system is placed into the standby mode, a message appears every minute.
•The system may not be placed into the standby mode when noise signals are present at the Media Receiver after a TV programme finishes.
No Operation off
The system will be automatically placed into the standby mode when no operation is performed for three hours.
1Press HOME MENU.
2Select “Power Control” (
/
then ENTER).
3Select “No Operation off” (
/
then ENTER).
4Select “Enable” (
/
then ENTER).
Item | Description |
Disable | Does not place the system into the standby |
(factory default) | mode. |
|
|
Enable | Places the system into the standby mode if no |
| operation is performed for three hours. |
5Press HOME MENU to exit the menu.
NOTE
•Five minutes before the system is placed into the standby mode, a message appears every minute.
08
English
35
En
