43
En
Basic Operations For Television Viewing 03
English
3.4.2 General Picture (Video) Adjustment for an AV Source
The directions below apply to all AV sources except OPTIMUM and DYNAMIC. If the viewing option is OPTIMUM,
your flat panel TV automatically adjusts the picture to the best possible level. If the preferred viewing option is
DYNAMIC, please refer to “4.1 Choose an AV Option (Video, Game, etc.).” For standard picture adjustments, follow
the steps below.
1 ) Access the
Picture
through the
Setup
.
2 ) Select an item to be adjusted.
Contrast is used in the example below.
3 ) Use the arrow buttons (/) to adjust to the desired level.
4 ) Press HOME MENU to exit the menu.
Reduce Noise from Analog TV
Sometimes electronic signal static can cause imperfections in the picture. This static is called Video Noise. Your
flat panel TV can reduce video noise from an analog TV channel, depending on the broadcast signal level.
Sometimes the broadcast signal has higher interference levels so that some video nois e is noticeable.
This function is only selectable for signals from an antenna. Follow the steps below to reduce noise on an analog
TV channel.
1 ) Access the
System Setup
through the
Setup
.
2 ) Select
Analog TV Setup
from the System Setup menu.
3 ) Select
Manual Adjust
from the submenu.
Only analog channels set using Auto Installation are manually adjustable.
4 ) Select
Program Entry
.
5 ) Select a channel number to be added.
Use the arrow buttons (
/
) to enter a channel number.
6 ) Select
Tuner NR
.
7 ) Select
On
.
The default setting is On.
8 ) Press HOME MENU to exit the menu.
AV Selection : PERFORMANCE
Contrast : 40
Brightness : 0
Color : 0
Tint : 0
Sharpness : 0
PureCinema
Reset
Picture
Contrast 32
PDP6020FD.book Page 43 Monday, March 17, 2008 10:51 AM