Pioneer PRO-610HD Adjustment Location And Items, Assembly Adjustment Location, Adjustment Items

PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5

6.3 ADJUSTMENT LOCATION AND ITEMS

Assembly Adjustment Location

Focus VR (VR1)

B

G Focus VR R

BCONV. AMP ASSY

C DIGITAL CONV. ASSY

DVIDEO ASSY

ESUB VIDEO ASSY

A DEFLECTION (SERVICE) ASSY

Front View

Lens assy (For Green)

Lens assy	Lens assy
(For Red)	(For Blue)

F	SIGNAL ASSY	Rear View
		Deflection	Deflection
		Yoke (B) CRT assy G Yoke (G)
		CRT assy B		CRT assy R
	Deflection
	Yoke
				Deflection
				Yoke (R)
		TP-BK	TP-GK
		B CRT DRIVE	G CRT DRIVE	R CRT DRIVE
		assy	assy	assy

Centering magnet

(Turn in either direction untill cross signal becomes white.)

MEASURING METHOD

Disconnect the FBT anode cable as shown below. Measure at the point where the cable enters the FBT.

Adjustment Items

1Brightness Adjustment

2Deflection Yoke Adjustment

3Focus Adjustment

4Test-cross Position Check

5Screen Size Adjustment

6Convergence Adjustment

7White Balance Adjustment

8Panel Adjustment

9Panel Adjustment for DTV

Caution : Take extra precaution when measuring the voltage. High voltage are also present in surrounding circuit boards. (CRT assy, POWER SUPPLY assy)

Pull straight up

Rubber

Cover

Holding the rubber cover firmly, turn counterclockwise and check that the lock has

been disengaged.

SERVICEMAN WARNING

Before removing the anode cable, turn off the power, unplug the AC plug and let the unit discharge for more than 1 minut.

Anode Cable

FBT

Note :

When reconnecting the cable, proceed in the reverse order. After reconnecting, tug on the cable to check that it is secure.

196