Pioneer Assembly Adjustment Location Guide, PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5

PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5

Assembly Adjustment Location Guide

If POWER SUPPLY ASSY is repaired or replaced

No adjustment is required

1Brightness Adjustment (∗2)

If DEFLECTION SERVICE ASSY

If CONV. AMP ASSY

If R, G or B CRT DRIVE ASSY

If DIGITAL CONV. ASSY

is repaired or replaced

is repaired or replaced

is repaired or replaced

is repaired or replaced

3Focus Adjustment (VR1: FOCUS VR) (∗2)

5Screen Size Adjustment (∗2)

6Convergence Adjustment (∗2)

7White Balance Adjustment (∗2)

5Screen Size Adjustment (∗2)

6Convergence Adjustment (∗2)

1Brightness Adjustment (∗1)

7White Balance Adjustment (Composite STD :∗1, Others :∗2)

3Focus Adjustment (∗2)

4Test-cross Position Check (∗2)

5Screen Size Adjustment (∗2)

6Convergence Adjustment (∗2)

1Brightness Adjustment (∗2)

If VIDEO ASSY	is repaired or replaced
	is repaired or replaced
If SIGNAL ASSY
	is repaired or replaced
If SUB VIDEO ASSY
	is repaired or replaced
If AV I/O ASSY
	is repaired or replaced
If CRT ASSY (R, G or B)
	is repaired or replaced
If LENS ASSY (R, G or B)
	is repaired or replaced
If MIRROR and SCREEN

7White Balance Adjustment (Composite STD : ∗1, Others :∗2)

8Panel Adjustment (∗1)

9Panel Adjustment for DTV (∗1)

7White Balance Adjustment (∗2)

4Test-cross Position Check (∗2)

7White Balance Adjustment (∗2)

No adjustment is required

1Brightness Adjustment (∗1)

2Deflection Yoke Adjustment (∗1)

3Focus Adjustment (Lens : ∗2, VR1 Focus VR :∗1)

6Convergence Adjustment (∗2)

7White Balance Adjustment (Composite STD : ∗1, Others :∗2)

3Focus Adjustment (Lens : ∗1, VR1 Focus VR :∗2)

6Convergence Adjustment (∗2)

6Convergence Adjustment (∗2)

If OTHER ASSY is repaired or replaced No adjustment is required

Note :

*1: Readjustment necessary

*2: Turn on the power and confirm the screen. When adjustment deviates, it is readjusted if necessory.

•When the EEPROMs are replaced, check the status of the unit.

•If any IC of the EEPROM is damaged, readjustment of all the items is necessary.

•The necessary adjustment items differ, depending on the assembly or optical part replaced. Check and readjust the adjustment items corresponding to the replaced assembly or part, following adjustment procedures 1 to 9.

Example: When the DIGITAL CONV. Assy is replaced, perform the following:

3. Focus check/adjustment → 4. Test-cross position check/adjustment → 5. Screen size check/adjustment → 6. Convergence check/adjustment

197