Pioneer PRO-510HD, PRO-610HD Removing Blocking In Multi-Screen Mode, Changing Password

PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5

9

HOW TO REMOVE BLOCKING FROM A PROGRAM IN PROGRESS

When a selected program or a program on a channel to which you have just changed has a rating higher than the current program blocking rating, the picture and sound will cut off and an enter password screen will appear.

Once the password has been entered, blocking will be removed.

NOTE:

Even when a password has been entered to cancel a block, if the monitor power is turn OFF then turned ON again, the Program Blocked screen will appear.

After setting, press MENU to turn the menu off.

REMOVING BLOCKING IN

MULTI-SCREEN MODE

∙Just as in normal single-screen mode, programs are blocked in SPLIT screen and SEARCH screen mode (see pages 40

and 41), but blocking may be removed only from the Main picture.

To remove blocking from a Sub picture or Search picture screen, switch to the Main picture for that channel and then remove blocking.

∙When viewing in FREEZE screen (p. 40) mode, only programming on the Moving screen to the left will be blocked and the programming on the Still screen to the right will be displayed as is.

Moving screen Still screen

Ç Block

Still screen

∙When blocking is on during SEARCH screen mode, the screen at search picture side will be blacked out (mute) without displaying: “PROGRAM BLOCKED”.

CHANGING PASSWORD

If you forget the password

When the message ‘INPUT YOUR PASSWORD’ shown in step 3 is displayed, press the RETURN button on the front panel and hold it down for 3 seconds or longer.

The password will become “1234”.

259