Pioneer PRO-610HD PANEL FACILITIES for SD-582HD5 and SD-532HD5, DPO sensor, MAIN POWER switch

PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5

PANEL FACILITIES for SD-582HD5 and SD-532HD5

A flip-down door conceals the control panel. Push gently and release, to open the door. To close the door, lift it back up into place.

NOTE:

If you accidentally pull the door, it may not shut properly. Push the door back in to shut it.

1POWER STANDBY/ON indicator

red: STANDBY

green: ON

2DPO sensor

Sensor to detect the room brightness.

3MAIN POWER switch

Press once to turn on the main power (STANDBY mode). Press again to turn off the main power.

4POWER button (STANDBY/ON)

Press once to turn on the Monitor. Press again to turn off the Monitor.

5INPUT SELECTOR button

Press to select your program source. Each press of the INPUT SELECTOR changes the selection to the next source.

	TV		INPUT 1
INPUT 4		INPUT 3		INPUT 2

6CHANNEL buttons

Press plus (+) or minus (–) to tune to a higher or lower channel. Only the preset channels can be tuned in using these buttons.

In some cases, the door may only open slightly when pushed. In such cases, open the door with your finger as shown in the figure at left.

270