Pioneer PRO-610HD Panel Facilities And Specifications, POWER STANDBY/ON indicator, DTV indicator

PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5

8. PANEL FACILITIES AND SPECIFICATIONS

PANEL FACILITIES for PRO-610HD and PRO-510HD

A flip-down door conceals the control panel. Push gently and release, to open the door. To close the door, lift it back up into place.

NOTE:

If you accidentally pull the door, it may not shut properly. Push the door back in to shut it.

1POWER STANDBY/ON indicator

red: STANDBY

green: ON

2DTV indicator

Lights when receiving a digital television broadcast.

If the SH-D09 digital tuner (sold separately) has been connected, the DTV indicator may still blink even when the power has been turned off. (This is not a defect.)

3DPO sensor

Sensor to detect the room brightness.

4MAIN POWER switch

Press once to turn on the main power (STANDBY mode). Press again to turn off the main power.

5POWER button (STANDBY/ON)

Press once to turn on the Monitor. Press again to turn off the Monitor.

6INPUT SELECTOR button

Press to select your program source. Each press of the INPUT SELECTOR changes the selection to the next source.

TV	(DTV)	INPUT 1
INPUT 4	INPUT 3	INPUT 2

7CHANNEL buttons

Press plus (+) or minus (–) to tune to a higher or lower channel. Only the preset channels can be tuned in using these buttons.

In some cases, the door may only open slightly when pushed. In such cases, open the door with your finger as shown in the figure at left.

266