Pioneer service manual Disconnect the Anode Cable, PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5

PRO-610HD, PRO-510HD, SD-582HD5, SD-532HD5

Lens Assy Lens Assy (Green)

(Red)Lens Assy

(Blue)

Slide the screen to right, and adjust the focus of the lens.

6

Disconnect the Anode Cable

WARNING:

Before disconnect the anode cable, turn off the power, unplug the AC plug and let the unit discharge for more than 1 minut.

Notes:

To assemble the screen, perform the above procedures in reverse order.

After assembling it, verify that the right and left sides of the screen are positioned as shown in the figure.

Fit left side edge of the screen to center of cabinet hole.

Screen

Cabinet

Pull straight up

Rubber

Cover

Anode Cable

Holding the rubber cover firmly, turn counterclockwise and

check that the lock has
been disengaged.	FBT

Note :

When reconnecting the cable, proceed in the reverse order. After reconnecting, tug on the cable to check that it is secure.

225