Using other functions

09

e! This setting is only displayed when the video signals below are being input:

—480i or 576i analog video signals

f! This setting is only displayed when the video signals below are being input:

—480i, 576i, 480p, 576p, 720p, 1080i analog video signals

—480i, 576i, 480p, 576p, 720p, 1080i, 1080p, 1080p24 HDMI video signals

gThis adjustment is only possible when 480i signals are being input from the composite video jacks.

h! If the image doesn’t match your monitor type, adjust the aspect ratio on the source component or on the monitor.

!This setting is only displayed when 480i/p or 576i/p video signals are being input.

!SP: A+B ON – Sound is output from the A-speaker terminals (up to 5 channels, depending on the source), the two speakers connected to the B-speaker terminals, and the subwoofer. The sound from the B-speaker terminals will be the same as the sound from the A-speaker terminals (multichannel sources will be downmixed to 2 channels).

!SP: OFF – No sound is output from the speakers.

showing, the front panel controls affect the main zone only.

3 Use the INPUT SELECTOR dial to select

the source for the sub zone.

For example, ZONE 2 CD-Rsends the source

connected to the CD-R/TAPEinputs to the sub

room (ZONE 2) .

! If you select TUNER, you can use the tuner

controls to select a preset station (see Saving

station presets on page 31 if you’re unsure

Switching the speaker terminals

If you selected Normal(SB/FH), Normal(SB/FW) or Speaker B at Speaker system setting on page 64 , you can switch between speakers using the SPEAKERS button. If you selected Front Bi-Amp or ZONE 2, the button will simply switch your main speaker terminals on or off.

%Use SPEAKERS on the front panel to select a speaker system setting.

As mentioned above, if you have selected Front Bi-Ampor ZONE 2, the button will simply switch your main speaker terminal (A) on or off. Press repeatedly to choose a speaker terminal option:

When you select Normal(SB/FH), you can select from:

!SP: SB/FH ON – Surround back or front height channels are added to the front, center and surround channels (maximum 5 channels) and a maximum of 7 channels are output. The surround back and front height channels are switched automatically according to the audio input signal.

!SP: SB ON – Surround back channels are added to the front, center and surround channels (maximum 5 channels) and a maximum of 7 channels are output.

!SP: FH ON – Front height channels are added to the front, center and surround channels

(maximum 5 channels) and a maximum of 7 channels are output.

!SP: OFF – No sound is output from the

speakers.

When you select Normal(SB/FW), you can select from:

!SP: SB/FW ON – Surround back or front wide channels are added to the front, center and surround channels (maximum 5 channels) and a maximum of 7 channels are output. The surround back and front wide channels are switched automatically according to the audio input signal.

!SP: SB ON – Surround back channels are added to the front, center and surround channels (maximum 5 channels) and a maximum of 7 channels are output.

!SP: FW ON – Front wide channels are added to the front, center and surround channels (maximum 5 channels) and a maximum of 7 channels are output.

!SP: OFF – No sound is output from the speakers.

When you select Speaker B, you can select from:

!SP: A ON – Sound is output from the A-speaker terminals (up to 7 channels (including surround back channels), depending on the source).

!SP: B ON – Sound is output from the two speakers connected to the B-speaker terminals. Multichannel sources will not be heard.

Note

!The subwoofer output depends on the settings you made in Manual speaker setup on page 64

. However, if SP: B ON is selected above, no sound is heard from the subwoofer (the LFE channel is not downmixed).

!All speaker systems (except

Speaker B connections) are switched off when headphones are connected.

Using the MULTI-ZONE controls

The following steps use the front panel controls to adjust the sub zone volume and select sources. See MULTI-ZONE remote controls on page 49 .

1Press MULTI-ZONE ON/OFF on the front panel.

Each press selects a MULTI-ZONE option:

!ZONE 2 ON – Switches the MULTI-ZONE feature on

!MULTI ZONE OFF – Switches the MULTI- ZONE feature off

The MULTI-ZONEindicator lights when the MULTI-ZONE control has been switched ON.

2Press MULTI-ZONE CONTROL on the front panel.

!When the receiver is on, make sure that any operations for the sub zone are done while ZONE 2 shows in the display. If this is not

how to do this). The tuner cannot be tuned to

more than one station at a time. Therefore,

changing the station in one zone also

changes the station in the other zone. Please

be careful not to change stations when

recording a radio broadcast.

4 When Speaker System is set to ZONE 2,

use the MASTER VOLUME dial to adjust

the volume for the sub zone.

5 When you’re finished, press

MULTI-ZONE CONTROL again to return to the main zone controls.

You can also press MULTI-ZONE ON/OFF on the front panel to switch off all output to the sub zone.

!You won’t be able to switch the main zone off completely unless you’ve switched off the MULTI-ZONE control first.

!If you don’t plan to use the MULTI-ZONE feature for a while, turn off the power in both the sub and main rooms so that this receiver is in standby.

MULTI-ZONE remote controls

Press the remote control’s ZONE 2 to operate the ZONE 2.

The following table shows the possible MULTI- ZONE remote controls:

Button(s) What it does

Switches on/off power in the sub

u zone.

En 49