HOME MEDIA GALLERY

Additional information

13

Symptoms

Causes

Remedies

Symptoms

Causes

Remedies

Cannot access the network.

The LAN cable is not firmly con-

Firmly connect the LAN cable (page 20).

 

nected.

 

 

The router is not switched on.

Switch on the router.

 

Internet security software is cur-

There are cases where a component with

 

rently installed in the connected

Internet security software installed cannot

 

component.

be accessed.

Cannot access the component connected to the network.

The component connected to the

If the client is automatically authorized, you

network is not properly set.

need to enter the corresponding informa-

 

tion again. Check whether the connection

 

status is set to “Do not authorize”.

There are no playable audio files

Check the audio files stored on the compo-

on the component connected to

nent connected to the network.

the network.

 

 

The audio component on the net- Switch on the audio component on the

 

work which has been switched

network before switching on this receiver.

 

off is switched on.

 

Playback does not start while

The component is currently

Check whether the component is properly

“Connecting...” continues to

disconnected from this receiver

connected to this receiver or the power

be displayed.

or the power supply.

supply.

The PC or Internet radio is not

The corresponding IP address is

Switch on the built-in DHCP server function

Audio playback is undesirably

The audio file currently being

stopped or disturbed.

played back was not recorded

 

in a format playable on this

 

receiver.

Check whether the audio file was recorded in a format supported by this receiver. Check whether the folder has been damaged or corrupted.

Note that there are cases where even the audio files listed as playable on this receiver cannot be played back or displayed (page 41).

properly operated.

not properly set.

of your router, or set up the network manu-

 

 

ally according to your network environment

 

 

(page 66).

 

The IP address is being automati-

The automatic configuration process takes

 

cally configured.

time. Please wait.

The audio files stored on

Windows Media Player 11 or

Install Windows Media Player 11 or

components on the network,

Windows Media Player 12 is not

Windows Media Player 12 on your PC (page

such as a PC, cannot be

currently installed on your PC.

38).

played back.

Audio files were recorded in

Play back audio files recorded in MP3, WAV

 

 

formats other than MP3, WAV

(LPCM only), MPEG-4 AAC, FLAC, or WMA. Note

 

(LPCM only), MPEG-4 AAC, FLAC,

that some audio files recorded in these formats

 

and WMA.

may not be played back on this receiver.

 

Audio files recorded in MPEG-4

Audio files recorded in MPEG-4 AAC or

 

AAC or FLAC are being played

FLAC cannot be played back on Windows

 

back on Windows Media Player

Media Player 11 or Windows Media Player

 

11 or Windows Media Player 12.

12. Try using another server. Refer to the

 

 

operation manual supplied with your server.

 

The component connected to the

Check whether the component is affected by

 

network is not properly operated.

special circumstances or is in the sleep mode.

 

 

Try rebooting the component if necessary.

 

The component connected to

Try changing the settings for the compo-

 

the network does not permit file

nent connected to the network.

 

sharing.

 

 

The folder stored on the compo-

Check the folder stored on the component

 

nent connected to the network

connected to the network.

 

has been deleted or damaged.

 

 

Network connections could be

Check the computer’s network settings,

 

restricted due to the computer’s

security settings, etc.

 

network settings, security set-

 

 

tings, etc.

 

 

The LAN cable is currently dis-

Connect the LAN cable properly (page 20).

 

connected.

 

 

There is heavy traffic on the

Use 100BASE-TX to access the components

 

network with the Internet being

on the network.

 

accessed on the same network.

 

 

When in the DMR mode, depend-

In this case, adjust the volume from the

 

ing on the external controller

receiver or remote control.

 

being used, playback may be

 

 

interrupted when a volume

 

 

operation is performed from the

 

 

controller.

 

Cannot access Windows

In case of Windows Media Player

Instead of logging onto the domain, log

Media Player 11 or Windows

11: You are currently logged onto

onto the local machine (page 38).

Media Player 12.

the domain through your PC with

 

 

Windows XP or Windows Vista

 

 

installed.

 

 

In case of Windows Media Player

 

 

12: You are currently logged onto

 

 

the domain through your PC with

 

 

Windows 7 installed.

 

En 77