12The System Setup and Other Setup menus

The Other Setup menu

The Other Setup menu is where you can make customized settings to reflect how you are using the receiver.

1Press on the remote control, then press HOME MENU.

A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the screens and select menu items. Press RETURN to exit the current menu.

2Select ‘System Setup’ from the Home Menu.

3Select ‘Other Setup’, then press ENTER.

4Select the setting you want to adjust. If you are doing this for the first time, you may want to adjust these settings in order:

!Auto Power Down – Sets the power to turn off automatically when the receiver is not being used.

!Volume Setup – Sets up the volume-related operations of this receiver (page 68).

!Remote Control Mode Setup – Sets this receiver’s remote control mode (page 68).

!Flicker Reduction Setup – Adjusts the way the GUI screen looks (page 68).

!Pairing Bluetooth Setup – Use to pair a Bluetooth ADAPTER and Bluetooth wireless technology device (page 33).

!Software Update – Use to update the receiver’s software and check the version.

5Make the adjustments necessary for each setting, pressing RETURN to confirm after each screen.

Auto Power Down

The power can be set to turn off automatically if no operation has been performed for a specific amount of time with no audio or video signals being input to the receiver. When using ZONE

2, the ZONE 2 power can also be set to turn off, but for ZONE 2 the power turns off automatically after the amount of time set here even if signals are being input or operations have been performed.

Different times can be set for the main zone and ZONE 2.

1Select ‘Auto Power Down’ from the Other Setup menu.

2Select the zone you want to set and set the time after which the power turns off.

!MAIN – The time can be selected from among “15 min”, “30 min”, “60 min” and “OFF”. The power turns off after there has been no signal and no operation for the selected time.

!ZONE 2 – The time can be selected from among “30 min”, “1 hour”, “3 hours”,

“6 hours”, “9 hours” and “OFF”. The power turns off after the selected time.

Volume Setup

You can set the maximum volume of this receiver or specify what the volume level will be when the power is turned on.

1Select ‘Volume Setup’ from the Other Setup menu.

2Select the Power ON Level setting you want.

The volume can be set so that it is always set to the same level when the receiver’s power is turned on.

!LAST (default) – When the power is turned on, the volume is set to the same level as when the power was last turned off.

!“---” – When the power is turned on, the volume is set to minimum level.

!–80.0dBto +12.0dB – Specify the volume to be set when the power is turned on, in steps of 0.5 dB.

It is not possible to set a volume level greater than the value specified at Volume Limit setup (see below).

3Select the Volume Limit setting you want.

Use this function to limit the maximum volume. The volume cannot be increased above the level set here, even by operating MASTER VOLUME button (or the dial on the front panel).

!OFF (default) – The maximum volume is not limited.

!–20.0dB/–10.0dB/0.0dB – The maximum volume is limited to the value set here.

4Select the Mute Level setting you want.

This sets how much the volume is to be turned down when MUTE is pressed.

!FULL (default) – No sound.

!–40.0dB/–20.0dB– The volume will be turned down to the level specified here.

5When you’re finished, press RETURN. You will return to the Other Setup menu.

Remote Control Mode Setup

!Default setting: 1

This sets this receiver’s remote control mode to prevent erroneous operation when multiple units of the receiver are being used.

1Select ‘Remote Control Mode Setup’ from the Other Setup menu.

2Select the Remote Control Mode setting you want.

3Select ‘OK’ to change the remote control mode.

4Follow the instructions on the screen to change the remote control’s setting. See Operating multiple receivers on page 52 .

5When you’re finished, press RETURN. You will return to the Other Setup menu.

Flicker Reduction Setup

!Default setting: OFF

The GUI screen’s resolution can be increased. If you feel the GUI screen is hard to see, try changing this setting. Note that the resolution in this setting only affects the GUI screen; it has no influence on the video output.

1Select ‘Flicker Reduction Setup’ from the Other Setup menu.

2Select the Flicker Reduction setting you want.

3When you’re finished, press RETURN. You will return to the Other Setup menu.

Software Update

Use this procedure to update the receiver’s software and check the version. There are two ways to update: via the Internet and via a USB memory device.

Updating via the Internet is performed by accessing the file server from the receiver and downloading the file. This procedure is only possible if the receiver is connected to the Internet. Updating via a USB memory device is performed by downloading the update file from a computer, reading this file onto a USB memory device then inserting this USB memory device into the USB port on the receiver’s front panel. With this procedure, the USB memory device containing the update file must first be inserted into the USB port on the receiver’s front panel.

!If an update file is provided on the Pioneer website, download it onto your computer. When downloading an update file from the Pioneer website onto your computer, the file will be in ZIP format. Unzip the ZIP file before saving it on the USB memory device. If there are any old downloaded files or downloaded files for other models on the USB memory device, delete them.

68En