Pioneer VSX-1021-K manual 69

The System Setup and Other Setup menus 12

Important

!DO NOT unplug the power cord during updating.

!When updating via the Internet, do not disconnect the LAN cable. When updating via a USB memory device, do not disconnect the USB memory device.

1Select ‘Software Update’ from the Other Setup menu.

2Select the update procedure.

!Update via Internet – The receiver checks whether updatable software is available via the Internet.

!Update via USB Memory – The receiver checks whether the USB memory device inserted into the USB port on the receiver’s front panel contains updatable software. “Accessing” is displayed and the update file is checked. Wait a while.

3Check on the screen whether or not an update file was found.

If “New version found.” is displayed, the update file has been found. The version number and updating time are displayed.

If “This is the latest version. There is no need to update.” is displayed, no update file has been found.

4To update, select OK.

The updating screen appears and updating is performed.

!The power turns off automatically once updating is completed.

Software Update messages

Status Descriptions messages

No update file was found on the NO UPDATE USB memory device. Store the file

FILEin the USB memory device’s root directory.

Status	Descriptions
messages
	Try disconnecting then reconnecting
	the USB device or storing the update
FILE ERROR	file again. If the error still occurs,
	try using a different USB memory
	device.
UPDATE	Turn the receiver’s power off, then
ERROR 1
	turn it back on and try updating the
to UPDATE
	software again.
ERROR 7
	If this message flashes, updating
	has failed. Update via a USB mem-
Update via	ory device. Put the update file on a
	USB memory device and connect
USB
	the device to the USB port. When
	the file is found, software updating
	starts automatically.
UE11	Updating has failed. Use the same
UE22	procedure to update the software
UE33	again.

En 69