13Additional information
Symptoms | Causes | Remedies |
Cannot listen to Internet radio | The firewall settings for compo- | Check the firewall settings for components |
stations. | nents on the network are cur- | on the network. |
| rently in operation. |
|
| You are currently disconnected | Check the connection settings for com- |
| from the Internet. | ponents on the network, and consult with |
|
| your network service provider if necessary |
|
| (page 66). |
| The broadcasts from an Internet | There are cases where you cannot listen |
| radio station are stopped or | to some Internet radio stations even when |
| interrupted. | they are listed in the list of Internet radio |
|
| stations on this receiver (page 39). |
The Home Media Gallery can- | The remote control is not cur- | Press HMG to set the remote control to the |
not be operated with the but- | rently set to the Home Media | Home Media Gallery mode (page 38). |
tons on the remote control. | Gallery mode. |
|
SIRIUS radio messages
Status messages | Causes | Remedy |
Antenna Error | The SIRIUS antenna is not prop- | Check that the antenna cable is attached |
| erly connected. | securely. |
Check Sirius Tuner | The SiriusConnectTM tuner is not | Check that the 8 pin mini DIN cable and AC |
| properly connected. | Adapter are attached securely. |
Acquiring Signal | The SIRIUS signal is too weak at | Check for antenna obstructions and reposi- |
| the current location. | tion the SIRIUS antenna to get better signal |
|
| reception. Use the Antenna Aiming option |
|
| to optimize the antenna position. |
Subscription Updating | Unit is updating subscription. | Wait until the encryption code has been |
|
| updated. |
Wireless LAN
Status messages | Causes | Remedy |
Network cannot be accessed | Wireless LAN converter’s power | Check that the USB cable connecting the |
via wireless LAN. | is not on. (Wireless LAN convert- | wireless LAN converter to the receiver’s DC |
| er’s “Power”, “WPS” and “Wire- | OUTPUT for WIRELESS LAN terminal is |
| less” indicators are not all lit.) | properly connected. |
| WLAN POW ERR is displayed on | There is a problem with the wireless LAN |
| the receiver’s display window. | converter’s power supply. Turn the receiv- |
|
| er’s power off, then disconnect the USB |
|
| cable, reconnect the USB cable and turn |
|
| the receiver’s power back on. |
|
| If WLAN POW ERR is still displayed after |
|
| repeating the above procedure several |
|
| times, there is a problem with the receiver |
|
| or the USB cable. Unplug the receiver |
|
| from the wall and call a Pioneer authorized |
|
| independent service company. |
| The LAN cable is not firmly con- | Firmly connect the LAN cable (page 22). |
| nected. |
|
| Wireless LAN converter and base | Improve the wireless LAN environment by |
| unit (wireless LAN router, etc.) | moving the wireless LAN converter and |
| are too far apart or there is an | base unit closer together, etc. |
| obstacle between them. |
|
| There is a microwave oven or | Use the system in a place away from micro- |
| other device generating electro- | wave ovens or others device generating |
| magnetic waves near the wire- | electromagnetic waves. |
| less LAN environment. | Avoid using devices generating electro- |
|
| |
|
| magnetic waves as much as possible when |
|
| using the system with the wireless LAN. |
Updating Channels | Unit is updating channels. | Wait until the encryption code has been |
|
| updated. |
Invalid Channel | Selected channel is not available/ | Select another channel. |
| does not exist. |
|
Firmware Updating | The SiriusConnectTM tuner’s | Wait for updating to finish. |
| firmware is being updated. |
|
Multiple wireless LAN converters are connected to the wireless LAN router.
When connecting multiple wireless LAN converters, their IP addresses must be changed. For example, if the wireless LAN router’s IP address is “192.168.1.1”, set the first wireless LAN converter’s IP address to “192.168.1.249”, the second wireless LAN converter’s IP address to “192.168.1.248”, using values between 2 and 249 (such as “249” and “248”) that are not assigned to other wireless LAN converters or to other devices.
78En