HDMI

Symptom

Remedy

The HDMI indicator blinks continuously.

Check all the points below.

No picture or sound.

This receiver is HDCP-compatible. Check that the components you

 

are connecting are also HDCP-compatible. If they are not, please

 

connect them using the component or composite video jacks.

 

Depending on the connected source component, it’s possible that

 

it will not work with this receiver (even if it is HDCP-compatible). In

 

this case, connect using the component or composite video jacks

 

between source and receiver.

 

If the problem still persists when connecting your HDMI compo-

 

nent directly to your monitor, please consult the component or

 

monitor manual or contact the manufacturer for support.

 

If video images do not appear on your TV, try adjusting the resolu-

 

tion, Deep Color or other setting for your component.

 

While analog video signals are being output over HDMI, use a

 

separate connection for audio output.

 

To output signals in Deep Color, use an HDMI cable (High Speed

 

HDMI® Cable) to connect this receiver to a component or TV with

 

the Deep Color feature.

No picture.

Try changing the Resolution setting (in Setting the Video options

 

on page 48 ).

No sound, or sound suddenly ceases.

Check that the HDMI Audio setting is set to AMP (Setting the

 

Audio options on page 46 ).

 

If the component is a DVI device, use a separate connection for

 

the audio.

 

If analog video is being output over HDMI, please use a separate

 

connection for the audio.

 

Check the audio output settings of the source component.

 

HDMI format digital audio transmissions require a longer time to

 

be recognized. Due to this, interruption in the audio may occur

 

when switching between audio formats or beginning playback.

 

Turning on/off the device connected to this unit’s HDMI OUT

 

terminal during playback, or disconnecting/connecting the HDMI

 

cable during playback, may cause noise or interrupted audio.

 

Additional information

13

Symptom

Remedy

 

 

Noisy or distorted picture.

Sometimes a video deck may output a noisy video signal (during

 

 

scanning, for example), or the video quality may just be poor (with

 

 

some video game units, for example). The picture quality may also

 

 

depend on the settings, etc. of your display device. Switch off the

 

 

video converter and reconnect the source and display device using

 

 

 

 

the same type of connection (component or composite), then start

 

 

playback again.

 

 

 

If the problem still persists when connecting your HDMI compo-

 

 

nent directly to your monitor, please consult the component or

 

 

monitor manual or contact the manufacturer for support.

 

 

HDCP ERROR shows in the display.

Check whether or not the connected component is compatible

 

 

with HDCP. If it is not compatible with HDCP, reconnect the

 

 

source device using a different type of connection (component or

 

 

composite). Some components that are compatible with HDCP

 

 

still cause this message to be displayed, but so long as there is no

 

 

problem with displaying video, this is not a malfunction.

 

When Control with HDMI is set to ON, the

Even when Control with HDMI is set to ON, the HDMI input is

 

TV/SAT input’s HDMI Input assignment

assigned for the BD, DVD, DVR/BDR and VIDEO 1 inputs regard-

 

is canceled.

less of the Control with HDMI setting, so use these terminals.

 

 

Synchronized operation not possible

Check the HDMI connections.

 

 

using Control with HDMI function.

The cable may be damaged.

 

 

 

 

Select ON for the Control with HDMI setting (see HDMI Setup on page 43 ).

Select ALL for the Control Mode with HDMI setting (see HDMI

Setup on page 43 ).

Turn the TV’s power on before turning on this receiver’s power.

Set the TV side Control with HDMI setting to on (see TV’s operating instructions).

En 75