Pitco Frialator SELV14T Filter Cleaning If Equipped, Weekly Preventative Maintenance

Models: SELV14 SELV14T

1 36
Download 36 pages 23.84 Kb
Page 27
Image 27

INSTALLATION & OPERATIONAL SELV MANUAL

9.3FILTER CLEANING (If Equipped)

1.Unscrew filter strainer cap from pickup tube and gently tap it to dislodge any crumbs from the slots. Use a clean cloth to remove any remaining crumbs and reattach.

2.Scrape all loose debris and crumbs from filter pickup assembly and filter pan with the filter scoop shovel.

3.Remove filter pickup and place in pot sink, power soak sink or dishwasher for cleaning. Be sure to rinse thoroughly and dry all surfaces before re-assembly.

4.Wipe the filter pan with clean damp cloth and a food grade detergent. If necessary place pan in pot sink to rinse all the detergent from the surfaces and dry all surfaces before re-assembly.

10 WEEKLY PREVENTATIVE MAINTENANCE

Performing the preventative maintenance steps above on a daily basis will keep your equipment clean and safe. On a weekly basis these additional steps should be performed.

1.Turn the fryer off. Allow the oil to cool to before pulling the fryer away from the hood. Hint: This maintenance may be ideal to perform on the day the oil is being changed so no oil is present in the tank or filter.

2.Disconnect the power cord(s), gas hose, and retention lanyard.

3.Wearing your personal protective equipment, pull the fryer away from the hood.

4.Check that vent hood drip cup is empty and not dripping oil into the flue.

5.Check that the hood baffles are clean and not dripping oil into the flue.

6.Clean the fryer sides, back and the flue area, it may be necessary to use a non-abrasive pad to scour and a putty knife to scrape the oil buildup. With a clean damp cloth and food grade detergent wipe the area clean.

7.Wipe up any excessive oil on the power cord(s) and gas hose with a dry cloth.

8.Check flue pipe for any foreign debris/object and remove if found.

9.Reattach power cord(s), gas hose, retention lanyard and push fryer back under the hood

10.Check that wires and cords are not frayed or loose in and out of the cabinet.

11.Check around the appliance for loose parts or accessories that need to be secured or other foreign items (ex: Aerosol cans) that should be removed from the area.

WARNING

Serious injury could result from direct contact with hot surfaces and/or oil. Always wear apron, heat resistant gloves for skin protection and goggles for eye protection

WARNING

Read the operation section of this manual prior to filling or operating the appliance.

27

L20-406 Rev 5 (3/14)

Page 27
Image 27
Pitco Frialator SELV14T operation manual Filter Cleaning If Equipped, Weekly Preventative Maintenance