Connect the Video and Power Cables
Turn your computer off. Leave the power cord plugged into the grounded outlet. Use the Dome EX display with the power adapter and video cable shipped.
For the Dome E2 display, the power adapter is the Ault MW116KA1249F53.
For the Dome E3, Dome E3c, and Dome E5 displays, the power adapter is the Ault MW122RA1223F52.
To connect the cables
1Plug one end of the DVI cable into the DVI port on the interface plate. Secure the connection.
2Plug the power cord into the power input port on the interface plate.
3Plug the other end of the DVI cable into the Video 1 port on the installed display controller. Secure the connection.
4Plug the other end of the power cord into the power supply.
5 Plug the power supply cord into a grounded AC outlet.
Connect the power cord and DVI cable to the interface plate on the back on the display.
Connect one or two displays to the controller board installed in your computer.
Installing the Display 9
