Planar Dome EX manual To change the configuration to single desktop, Restoring dual heads

To change the configuration to single desktop

If you are working on a dual-headed display, you can use the following procedure to change your hardware and software configuration to single desktop.

1Use the InstallShield Wizard to uninstall the existing driver.

2 On the DIP switch, place switch 3 in the ON position.

3Reinstall the display controller. Then attach both displays to the controller.

4Power on the system, and run Setup.exe to install the driver.

5 Set the display resolution.

To get information

Open the Dome tab to retrieve information on the two displays you are using to run single desktop. Information for both left and right panels appears at the bottom of the Dome tab.

Restoring dual heads

To return to dual-headed display, follow the procedure above but place switch 3 on the DIP switch in the OFF position. Then set the display resolution.

Single Desktop 31