Install the AX3 Display Driver | Planar Dome EX specification

Install the AX3 Display Driver

Before you install the driver, remove any previously installed display driver for the display controller from your system.

To install the driver

1Start the system. Click Cancel on the Found New Hardware Wizard. Click No when the system prompts you restart the computer.

2Insert the driver installation CD and run SETUP.EXE.

3 Click Next.

4 Click Yes to the license agreement. The installation starts.

5Follow the onscreen instructions to complete the installation. Planar recommends that you select the Express installation option.

6When the Setup complete message appears, select Yes, I want to restart my computer now. and click Finish.

7If the Digital Signature Not Found message appears, click Yes or Continue to complete the driver installation.

To configure the display

1Right-click the desktop and select Properties > Settings.

2 Use the native resolution of the display.

3 Click OK until you return to the desktop.

12 Dome EX Display

Image 22

Planar Dome EX manual Install the AX3 Display Driver, To configure the display

Contents

Dome EX Display User’s Guide Planar Systems, Inc. All rights reserved Contents Product Information Symbol explanations Intended use Safety precautions Safety tips Unpacking and handling tips Preventing fire and injury Cleaning the display Shipping/storing the display Disposal information DVI cable About the Display System Requirements Display Components Tilt range Height range Orientation modeDisplay Positions Viewing angle Stand cable cover Desk Stand FeaturesStand height lock USB hub Installing the Display Set the DIP Switch on the Dome DX2 Board Tips Install the Display Controller To install the display controller Connect the Video and Power Cables To connect the cables To enable the display Install the Dome DX Display DriverTo install the driver To change the display properties To set brightness To set the resolution and paletteAuto-orientation To set driver options Install the AX3 Display Driver To configure the display To set the display mode manually To adjust the display propertiesTo use a dual-display configuration Appendix Troubleshooting Problem Possible Cause Solution Dome E2 Specification Category Characteristic Item Specification Reliability Power SupplyEnvironment Dome E3 Specification Model Dome E3 Specification Dome E3 Specification EMI shielding No emission of low-level radiation Temperature Dome E3c Specification Display Mtbf 30,000 hours Backlight Dome E5 Specification Dome E5 Specification Video Modes Connector Ports Details of DIN connectors LED Status Lights LED a status information after initial power-on Power-up sequence information from LEDLED B status information after initial power-on To set the display resolution Single Desktop To change the configuration to single desktop Restoring dual heads Auto-Installation System configuration requirement Installation options Prompting user response during Fastinst.bat To remove the Dome DX driver Display Driver RemovalTo remove the AX3 driver Power Management Grayscale Palette Options Dynamic gray palette Palette options with multiple displaysDesktop icons Nonlinear static gray palette Static gray palette Index Using single desktop Regulatory Compliance Canada, European Union, United StatesPage Fax + 358 9 420 EU Declaration of Conformity for Medical Application FCC Compliance Statement Japan AustralianChina Korea Standard Warranty Return Procedure Standard WarrantySummary Summary Limitations and Exclusions of Dome Displays Limitation of Implied Warranties Exclusion of Damages Effect of Local Law Medicalsales@planar.com Medicalsupport@planar.com