System Requirements | Planar Dome EX specification

System Requirements

Display systems using the DX2 board:

•PCI slot (64 bit recommended)

•50 MB hard disk space

•256 MB RAM

•CD-ROM drive

•Windows XP or Windows 2000 with Service Pack 4 or higher

Display systems using the AX3 board:

•Intel Pentium 4/Xeon; AMD Athlon 64/K7/XP or compatible

•PCI Express x16 lane slot

•50 MB hard disk space

•256 MB RAM

•CD-ROM drive

•Windows XP or Windows 2000 with Service Pack 4 or higher

•Power supply, 350 watts or greater

2 Dome EX Display

Image 12

Planar Dome EX manual System Requirements

Contents

Dome EX Display User’s Guide Planar Systems, Inc. All rights reserved Contents Product Information Symbol explanations Intended use Safety precautions Safety tips Unpacking and handling tips Preventing fire and injury Cleaning the display Shipping/storing the display Disposal information DVI cable About the Display System Requirements Display Components Orientation mode Display PositionsTilt range Height range Viewing angle Desk Stand Features Stand height lockStand cable cover USB hub Installing the Display Set the DIP Switch on the Dome DX2 Board Tips Install the Display Controller To install the display controller Connect the Video and Power Cables To connect the cables Install the Dome DX Display Driver To install the driverTo enable the display To change the display properties To set the resolution and palette Auto-orientationTo set brightness To set driver options Install the AX3 Display Driver To configure the display To adjust the display properties To set the display mode manuallyTo use a dual-display configuration Appendix Troubleshooting Problem Possible Cause Solution Dome E2 Specification Category Characteristic Item Specification Power Supply ReliabilityEnvironment Dome E3 Specification Model Dome E3 Specification Dome E3 Specification EMI shielding No emission of low-level radiation Temperature Dome E3c Specification Display Mtbf 30,000 hours Backlight Dome E5 Specification Dome E5 Specification Video Modes Connector Ports Details of DIN connectors LED Status Lights Power-up sequence information from LED LED a status information after initial power-onLED B status information after initial power-on To set the display resolution Single Desktop To change the configuration to single desktop Restoring dual heads Auto-Installation System configuration requirement Installation options Prompting user response during Fastinst.bat Display Driver Removal To remove the Dome DX driverTo remove the AX3 driver Power Management Grayscale Palette Options Palette options with multiple displays Desktop iconsDynamic gray palette Nonlinear static gray palette Static gray palette Index Using single desktop Regulatory Compliance Canada, European Union, United StatesPage Fax + 358 9 420 EU Declaration of Conformity for Medical Application FCC Compliance Statement Australian ChinaJapan Korea Standard Warranty Standard Warranty Return ProcedureSummary Summary Limitations and Exclusions of Dome Displays Limitation of Implied Warranties Exclusion of Damages Effect of Local Law Medicalsales@planar.com Medicalsupport@planar.com