Fastinst.bat | Planar Dome EX manual

Four sample batch files are provided with the Dome DX display driver. The content of each file, shown here, illustrates the use of these switches.

fastinst.bat

setup.exe -s -f2%TEMP%\fastinst.log

uninst.bat

setup.exe -s -f1un_install\setup.iss -f2%TEMP%\uninst.log -remove

sample1.bat

setup.exe -s -f2%TEMP%\sample1.log -bit8 -noddraw -static -noautodetect

sample2.bat

setup.exe -s -f2%TEMP%\sample2.log -bit8 -notstatic -yesddraw –noautodetect

Auto-Installation 35

Image 45

Planar Dome EX manual Fastinst.bat

Contents

User’s Guide Dome EX Display Planar Systems, Inc. All rights reserved Contents Product Information Intended use Symbol explanations Safety tips Safety precautions Preventing fire and injury Unpacking and handling tips Cleaning the display Disposal information Shipping/storing the display DVI cable About the Display System Requirements Display Components Display Positions Orientation modeTilt range Height range Viewing angle Stand height lock Desk Stand FeaturesStand cable cover USB hub Installing the Display Tips Set the DIP Switch on the Dome DX2 Board To install the display controller Install the Display Controller To connect the cables Connect the Video and Power Cables To install the driver Install the Dome DX Display DriverTo enable the display To change the display properties Auto-orientation To set the resolution and paletteTo set brightness To set driver options To configure the display Install the AX3 Display Driver To adjust the display properties To set the display mode manuallyTo use a dual-display configuration Appendix Problem Possible Cause Solution Troubleshooting Category Characteristic Item Specification Dome E2 Specification Power Supply ReliabilityEnvironment Model Dome E3 Specification Dome E3 Specification Dome E3 Specification EMI shielding No emission of low-level radiation Temperature Dome E3c Specification Display Mtbf 30,000 hours Backlight Dome E5 Specification Dome E5 Specification Video Modes Details of DIN connectors Connector Ports LED Status Lights Power-up sequence information from LED LED a status information after initial power-onLED B status information after initial power-on Single Desktop To set the display resolution Restoring dual heads To change the configuration to single desktop System configuration requirement Auto-Installation Installation options Prompting user response during Fastinst.bat Display Driver Removal To remove the Dome DX driverTo remove the AX3 driver Power Management Grayscale Palette Options Desktop icons Palette options with multiple displaysDynamic gray palette Nonlinear static gray palette Static gray palette Index Using single desktop Canada, European Union, United States Regulatory CompliancePage Fax + 358 9 420 EU Declaration of Conformity for Medical Application FCC Compliance Statement China AustralianJapan Korea Standard Warranty Standard Warranty Return ProcedureSummary Limitation of Implied Warranties Summary Limitations and Exclusions of Dome Displays Effect of Local Law Exclusion of Damages Medicalsales@planar.com Medicalsupport@planar.com