User’s Manual of
Deny: Drop packet.
VLAN | Any / VID. | Any |
| Any: Any VLAN id. |
|
| VID: 1~4094. A certain VLAN id. |
|
|
|
|
Packet Type | IPv4 / | IPv4 |
| IPv4: Set Ipv4 packet field. |
|
| |
|
| Binding: Set binding entry. |
|
|
|
|
Src IP Address | Set this field if Packet Type is IPv4, else ignore. | Any |
| Any / IP and Mask |
|
| Any: Any IP address. |
|
| IP : A certain IP address. |
|
| Mask: ***.***.***.*** |
|
| * is represent a digit from 0~9, |
|
| *** is range from 0 to 255 |
|
| Notice: This is not subnet mask. |
|
|
|
|
Dst IP Address | Set this field if Packet Type is IPv4, else ignore. | Any |
| Any / IP and Mask |
|
| Any: Any IP address. |
|
| IP : A certain IP address. |
|
| Mask: ***.***.***.*** |
|
| * is represent a digit from 0~9, |
|
| *** is range from 0 to 255 |
|
|
|
|
IP Fragment | Set this field if Packet Type is IPv4, else ignore. | Uncheck |
| Uncheck / Check |
|
| Uncheck: Not check IP fragment field. |
|
| Check: Check IP fragment field. |
|
|
|
|
L4 Protocol | Set this field if Packet Type is IPv4, else ignore. | Any |
| Any / ICMP(1) / IGMP(2) / TCP(6) / UDP(17) |
|
|
|
|
Protocol | Set this field if Packet Type is IPv4, else ignore. |
|
| 0~255. |
|
| If protocol not find in L4 Protocol field, you can direct assign |
|
| number. |
|
|
|
|
TCP | Set this field if Packet Type is IPv4, else ignore. | Any |
| Any / FTP(21) / HTTP(80) |
|
|
|
|
Port | Set this field if Packet Type is IPv4, else ignore. |
|
| 0~65535 |
|
| If TCP port not find in TCP field, you can direct assign number. |
|
|
|
|
UDP | Set this field if Packet Type is IPv4, else ignore. | Any |
| Any / DHCP(67) / TFTP(69) / NetBios(137) |
|
|
|
|
108