Planet Technology FGSW-2620PVM, FGSW-2620VM manual 122

User’s Manual of FGSW-2620VM / FGSW-2620PVM

The page includes the following fields:

Object	Description
PoE PSU Status	PoE PSU Status shows status of power supply for PoE output.
PoE Temperature Unit 1	Display the current operating temperature of PoE chip unit 1.
	The unit 1 is in charge of PoE Port-1~Port-12
PoE Temperature Unit 2	Display the current operating temperature of PoE chip unit 2.
	The unit 1 is in charge of PoE Port-13~Port-24
Power limit mode	Allow to configure power limit mode of Web Smart Device. It can choose :
	„	Port Priority Deliver PoE power by port priority setting
	„	Total Limit. Set limit value of the total POE port provided power to the PDs.
Power Allocation	Show the total watts usage of PoE Switch.
PoE Function	Can enable or disable the PoE function.
Priority	Set port priority for the POE power management
	It can choose the “port priority”, value is :
	„	Critical
	„	High
	„	Low
	High priority is “Critical”.
Device class	Class 0 is the default for PDs. However, to improve power management at the
	PSE, the PD may opt to provide a signature for Class 1 to 3.
	The PD is classified based on power. The classification of the PD is the maximum
	power that the PD will draw across all input voltages and operational modes. A
	PD shall return Class 0 to 3 in accordance with the maximum power draw as
	specified by Table 4.1.
Current(mA)	It shows the PoE device current Amp.
Consumption [W]	It shows the PoE device current watt.
Power Limit	It can limit the port PoE supply watts.
	Per port maximum value must less 15.4, total ports values must less than the
	Power Reservation value.
	Once power overload detected, the port will auto shut down and keep on
	detection mode until PD’s power consumption lower than the power limit value.

For FGSW-2620PVM, the total PoE power reservation from Port-1~24 is up to 190W

122