User’s Manual of FGSW-2620VM / FGSW-2620PVM

2.2.3 Installing the SFP transceiver

The sections describe how to insert an SFP transceiver into an SFP slot.

The SFP transceivers are hot-pluggable and hot-swappable. You can plug-in and out the transceiver to/from any SFP port without having to power down the Managed Switch. As the Figure 2-10appears.

Figure 2-10:Plug-in the SFP transceiver

Approved PLANET SFP Transceivers

PLANET Managed switches supports both single mode and multi mode SFP transceiver. The following list of approved PLANET SFP transceivers is correct at the time of publication:

1000Base-SX/LX SFP transceiver:

„MGB-SXSFP (1000BASE-SX SFP transceiver – Multi mode / 220m)

„MGB-LXSFP (1000BASE-LX SFP transceiver - Single Mode / 10km)

„MGB-L30SFP (1000Base-LX SFP transceiver – Single Mode / 30Km)

„MGB-L50SFP (1000Base-LX SFP transceiver - Single Mode / 50Km)

It recommends using PLANET SFPs on the Switch. If you insert a SFP transceiver that is not supported, the Managed Switch will not recognize it.

Before connect the other switches, workstation or Media Converter.

1.Make sure both side of the SFP transceiver are with the same media type, for example: 1000Base-SX to 1000Base-SX, 1000Bas-LX to 1000Base-LX.

2.Check the fiber-optic cable type match the SFP transceiver model.

¾To connect to 1000Base-SXSFP transceiver, use the multi-modefiber cable- with one side must be male duplex LC connector type.

25