User’s Manual of FGSW-2620VM / FGSW-2620PVM

4.5.4 RSTP System Configuration

This section provides RSTP-System Configuration from the Switch, the screen in Figure 4-5-4appears.

„The user can view spanning tree information of Root Bridge.

„

The user can modify RSTP state. After modification, click

Apply

.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 4-5-4:RSTP System Configuration interface

The page includes the following fields:

 

 

Object

Description

RSTP mode:

The user must enable the RSTP function first before configuring the related

parameters.

 

Protocol Version

A value used to specify the spanning tree protocol, the original spanning tree

protocol (STP, 802.1d) or the rapid spanning tree protocol (RSTP, 802.1w).

 

 

 

 

The switch with the lowest value has the highest priority and is selected as the

Priority (0-61440):

root. If the value is changed, the user must reboot the switch.

 

 

The value must be a multiple of 4096 according to the protocol standard rule.

 

 

 

The number of seconds a switch waits without receiving Spanning-tree Protocol

Max Age (6-40):

configuration messages before attempting a reconfiguration.

 

 

Enter a value between 6 through 40.

 

 

 

The time that controls the switch to send out the BPDU packet to check RSTP

Hello Time (1-10):

current status.

 

 

Enter a value between 1 through 10.

 

 

80