User’s Manual of FGSW-2620VM / FGSW-2620PVM

Lit: indicate that the port is operating at 100Mbps.

LNK/ACT 100 Green Off: indicate that the port is operating at 10Mbps or 1000Mbps.

Blink: indicate that the Switch is actively sending or receiving data over that port.

FGSW-2620PVM LED indication

 

 

 

Figure 2-4:FGSW-2620PVM LED panel

„ System

 

 

 

 

 

 

 

LED

Color

Function

 

PWR

Green

Lights to indicate that the Switch has power.

 

 

 

 

„Per 10/100Base-TX, PoE interfaces (Port-1 to Por-24)

LED

Color

 

Function

LNK/ACT

Green

Lights: To indicate the link through that port is successfully established.

 

 

 

 

 

 

Blink: To indicate that the Switch is actively sending or receiving data over that port.

 

 

 

 

PoE In-Use

Orange

Lights: To indicate the port is providing 48VDC in-line power.

 

 

 

To indicate the connected device is not a PoE Powered Device (PD).

 

 

Off:

 

 

 

 

„Per 10/100/1000Base-T port /SFP interfaces

LED

Color

Function

 

 

 

 

 

Lit: indicate that the port is operating at 1000Mbps.

LNK/ACT 1000

Green

Off: indicate that the port is operating at 10Mbps or 100Mbps.

 

 

Blink: indicate that the Switch is actively sending or receiving data over that port.

 

 

 

 

 

Lit: indicate that the port is operating at 100Mbps.

LNK/ACT 100

Green

Off: indicate that the port is operating at 10Mbps or 1000Mbps.

 

 

Blink: indicate that the Switch is actively sending or receiving data over that port.

 

 

 

1.Press the RESET button once. The t Switch will reboot automatically.

2.Press the RESET button for about 10 seconds. The Switch will back to the factory default mode; the entire configuration will be erased.

3.The 2 Gigabit TP/SFP combo ports are shared with port 25/26 of FGSW-2620VM / FGSW-2620PVM. Either of them can operate at the same time.

21