User’s Manual of FGSW-2620VM / FGSW-2620PVM

4.6.1 Aggregator setting

This section provides Port Trunk-Aggregator Setting of each port from the Managed Switch, the screen in Figure 4-6-1appears.

Figure 4-6-1:Port Trunk—Aggregator setting interface (two ports are added to the left field with LACP enabled)

The page includes the following fields:

ObjectDescription

A value which is used to identify the active LACP. The Managed Switch with the

System Priority:lowest value has the highest priority and is selected as the active LACP peer of the trunk group.

Group ID:

There are 13 trunk groups to be selected. Assign the "Group ID" to the trunk group.

„ Enabled, the trunk group is using LACP. A port which joins an LACP trunk group has to make an agreement with its member ports first.

„ Disabled, the trunk group is a static trunk group. The advantage of having

LACP:

the LACP disabled is that a port joins the trunk group without any handshaking with its member ports; but member ports won’t know that they should be aggregated together to form a logic trunk group.

85