User’s Manual of FGSW-2620VM / FGSW-2620PVM

1.4 Product Features

¾Physical Port

FGSW-2620VM

„24-Port 10/100Base-TX RJ-45 interfaces

„2-Port Gigabit TP/SFP combo interfaces

„Reset button for system management

FGSW-2620PVM

„24-Port 10/100Base-TX RJ-45 with PoE Injector

„2-Port Gigabit TP/SFP combo interfaces

„Reset button for system management

„1 RS-232 male DB9 console interface for Switch basic management and setup

¾Layer 2 Features

„Complies with the IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z Gigabit Ethernet standard

„Supports Auto-negotiation and Half-Duplex / Full-Duplex modes for all 10Base-T / 100Base-TX and Full-Duplex mode for 1000Base-T ports.

„Auto-MDI/MDI-X detection on each RJ-45 port

„Prevents packet loss Flow Control:

•IEEE 802.3x PAUSE frame Flow Control for Full-Duplex mode

•Back-Pressure Flow Control in Half-Duplex mode

„High performance Store and Forward architecture, broadcast storm control, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth

„8K MAC Address Table, automatic source address learning and ageing

„Support VLANs:

•IEEE 802.1Q Tag-Based VLAN

•Up to 255 VLANs groups, out of 4096 VLAN IDs

•Port-Based VLAN

•Q-in-Q tunneling (Double Tag VLAN)

„Supports Link Aggregation

•Up to 13 Trunk groups

•Up to 8 ports per trunk group with 1.6Gbps bandwidth (Full Duplex mode)

•IEEE 802.3ad LACP (Link Aggregation Control Protocol)

•Cisco ether-Channel (Static Trunk)

„Support Spanning Tree Protocol:

•STP, IEEE 802.1D (Classic Spanning Tree Protocol)

•RSTP, IEEE 802.1w (Rapid Spanning Tree Protocol)

¾Quality of Service

„4 priority queues on all switch ports

„Traffic classification:

•IEEE 802.1p Class of Service

•IP TOS / DSCP code priority

•Port Base priority

„Strict priority and weighted round robin (WRR) CoS policies

„Ingress/Egress Bandwidth control on each port

14