User’s Manual of FGSW-2620VM / FGSW-2620PVM

port rate

Description:

Set port effective ingress or egress rate.

Syntax:

port rate <ingress egress> <0..8000> [<port-list>]

Parameters:

<0..8000> specifies the ingress or egress rate.<0..8000>

<port-list> specifies the ports to be set. If not entered, all ports are set.

port priority

Description:

Set port priority.

Syntax:

port priority <disable low high> [<port-list>]

Parameters:

<port-list> specifies the ports to be set. If not entered, all ports are set.

port jumboframe

Description:

Set port jumbo frame. When port jumbo frame is enable, the port forward jumbo frame packet

Syntax:

port jumboframe <enable disable> [<port-list>]

Parameters:

<port-list> specifies the ports to be set. If not entered, all ports are set.

show port status

Description:

Show port status, including port State, Link, Trunking, VLAN, Negotiation, Speed, Duplex, Flow control, Rate

control ,Priority, Security, BSF control.

Switch(config)# show port status

----------------------------------------------------------------------

Port 1 Information

----------------------------------------------------------------------

State: on

Link: down

Trunking: none

VLAN: DEFAULT

Priority: disable

Security: off

----------------------------------------------------------------------

131