User’s Manual of
4.4.3 Port-based VLAN
Packets can go among only members of the same VLAN group. Note all unselected ports are treated as belonging to another single VLAN. If the
In order for an end station to send packets to different VLANs, it itself has to be either capable of tagging packets it sends with VLAN tags or attached to a
Figure
Create a VLAN and add member ports to it
1.Click the hyperlink "VLAN” \ “Static VLAN" to enter the VLAN configuration interface.
2.Select “Port Based VLAN” at the VLAN Operation Mode, to enable the
3.Click “ Add “ to create a new VLAN group. Then the following Figure
4.Type a name and Group ID for the new VLAN, the available range is
5. | From the Available ports box, select ports to add to the Managed Switch and click | Add | . |
6.Click Apply.
7.You will see the VLAN Group displays.
8.If the
9.Use “Delete” button to delete unwanted
10.Use “ Edit” button to modify existing
By adding ports to the VLAN you have created one
63