Planet Technology FGSW-2620PVM, FGSW-2620VM 2.1.2 LED Indications

User’s Manual of FGSW-2620VM / FGSW-2620PVM

■Reset button

At the left of front panel, the reset button is designed for reboot the Managed Switch without turn off and on the power. The following is the summary table of Reset button functions:

Reset Button Pressed and Released	Function
About 1~3 second	Reboot the Managed Switch
	Reset the Managed Switch to Factory Default configuration.
	The Managed Switch will then reboot and load the default
Until the PWR LED lit off	settings as below:
	。	Default Password: admin
	。	Default IP address: 192.168.0.100
	。	Subnet mask: 255.255.255.0
	。	Default Gateway: 192.168.0.254

2.1.2 LED Indications

The front panel LEDs indicates instant status of port links, data activity and system power; helps monitor and troubleshoot when needed.

FGSW-2620VM LED indication

			Figure 2-3:FGSW-2620VM LED panel
„ System
	LED	Color	Function
	PWR	Green	Lights to indicate that the Switch has power.

„Per 10/100Base-TX RJ-45 port

LED	Color	Function
LNK/ACT	Green	Lights to indicate the link through that port is successfully established.
		Blink to indicate that the Switch is actively sending or receiving data over that port.

„Per 10/100/1000Base-T port /SFP interfaces

LED	Color	Function
		Lit: indicate that the port is operating at 1000Mbps.
LNK/ACT 1000	Green	Off: indicate that the port is operating at 10Mbps or 100Mbps.
		Blink: indicate that the Switch is actively sending or receiving data over that port.

20