User’s Manual of FGSW-2620VM / FGSW-2620PVM

4.6.3 State Activity

Having set up the LACP aggregator on the tab of Aggregator Setting, you can configure the state activity for the members of the LACP trunk group. You can tick or cancel the checkbox beside the state label. When you remove the tick mark of the

port and click Apply , the port state activity will change to Passive.

Figure 4-6-7:State Activity of Switch 1

The page includes the following fields:

ObjectDescription

Active:

The port automatically sends LACP protocol packets.

 

 

Passive:

The port does not automatically send LACP protocol packets, and responds only if it receives LACP protocol packets from the opposite device.

90