|
| User’s Manual of | ||
|
|
| ||
Mode | individual ports. The threshold is the percentage of the port's total bandwidth | |||
| used by broadcast traffic. When broadcast traffic for a port rises above the | |||
| threshold you set, broadcast storm control becomes active. | |||
| The valid threshold values are 1/2, 1/4, 1/8, 1/16 and OFF. | |||
| Default is “OFF”. | |||
|
|
| ||
| To select broadcast storm Filter Packets type. If no packets type by selected, | |||
| mean can not filter any packets .The Broadcast Storm Filter Mode will show OFF. | |||
Broadcast Storm Filter | The selectable items as below: | |||
• | Broadcast Packets | |||
Packets Select | ||||
• | IP Multicast | |||
| ||||
| • | Control Packets | ||
| • Flooded Unicast / Multicast Packets | |||
|
|
| ||
| Provide Collision Retry Forever function ”Disable” or 16, 32, 48 collision | |||
| numbers on Managed Switch. If this function is disabled, when a packet meet a | |||
Collision Retry Forever | collision, the Managed Switch will retry 6 times before discard the packets. | |||
| Otherwise, the Managed Switch will retry until the packet is successfully sent. | |||
| Default value is 16. | |||
|
|
| ||
| Provide MAC address table Hashing setting on Managed Switch; available | |||
Hash Algorithm | options are CRC Hash and Direct Map. | |||
| Default mode is | |||
|
|
| ||
802.1x protocol | Enable / disable 802.1x protocol. | |||
|
|
| ||
Apply button | Press the button to complete the configuration. | |||
|
|
|
| |
|
|
|
| |
40