Backup
The SNAZ uses preinstalled BakBone NetVault software to perform system data backups.
1From the menu bar, select System - Services and click on Backup. The Backup (Register) page opens:
The Machine ID was automatically generated at the time the NetVault Software was installed on the SNAZ.
2Enter the License Key. When the SNAZ system is registered, via the Plasmon Warranty Registration website, the License Key will be supplied by email and should be entered here.
3Click the 
button to complete the software registration.
A message bar will indicate the success or failure of the regis- tration, along with troubleshooting information. In the event of any errors or problems, please contact Plasmon Technical Support.
A hyperlink to the Plasmon Warranty Registration website is also presented.
4Click on the Configuration tab.
5Enter a Machine Name. To allow the distinction between different devices within a NetVault environment, a unique Machine Name will be generated for your SNAZ.
6Enter a Password and then Confirm Password if you wish to restrict client access to the Backup services.
7Click 
to save the changes and, as appropriate, click 
to start or click 
to stop the service.
22 | 97707987 Rev A |
