Recovering a replication source
To recover from a failure using a replication target’s copy of system data:
1From the menu bar, select Data Protection - Replication Source.
Click 
. The Data Protection - Replication Sources - Recover page opens:
2Enter:
•Target Host - The hostname or IP address of the Replication target system
•Mirror Directory - The directory on the target system that the Replication was written to
•Owner - The user name of the Replication source owner
•Password - The Replication source owner's password.
3Click 
. A warning message is displayed, click 
to confirm. A message will indicate when the recovery is completed.
62 | 97707987 Rev A |
