S150: INSTALLING THE POLAR BIKE
MOUNT AND THE SPEED SENSOR
ADAPTER
Riding direction
Check that the Bike Mount fits snugly on the handlebar. If necessary, attach the rubber pad on the inner surface of the Bike Mount.
Use cable ties to secure the Bike Mount snugly on the handlebar. The correct place is on the right side of the handlebar. Attach the adapter to the Bike Mount so that the wire is pointing to the left. Press the adapter so that it stays firmly in its place. Attach the receiver snugly by securing the wrist strap.
S150: INSTALLING THE SPEED SENSOR
1.Check the front side of the right front fork to find a suitable place for the speed sensor. Clean and dry the area.
|
|
|
|
| " |
|
|
|
|
| .2 |
|
|
|
| - | 0 |
|
| " | m | ||
|
|
| |||
| 2 | 5 | m | ||
.1 | - |
| |||
0 | 3 |
|
|
| |
Riding direction
0.12" - 0.2" 3 - 5 mm
77