Deployment Guide for the Polycom VVX 1500 D Phone

Polycom CMA Provisioning

Only one phone line associated with a Polycom CMA system can be provisioned on a VVX 1500 D phone, but the line key associated with that line is configurable. For detailed information on configuration file settings, refer to <prov/> on page A-6.

Modifying Phone’s Configuration Using the Web Interface

You can make changes to the phone’s configuration through the web interface to the phone. The factory default username and password for the web interface is Polycom and 456 respectively (the username is case sensitive).

Note

Blind transfer, call recording, picture frame, corporate directory (LDAP Integration),

 

and phone server redundancy cannot be enabled/disabled through the web

 

interface. You cannot change the displayed language through the web interface.

 

You must make changes for these features through the configuration files. Refer to

 

Deploying Phones From the Provisioning Server on page 2-13.

Note

 

 

Changes made through the web interface are written to the override file (highest

 

priority). These changes remain active until Settings > Advanced > Admin

 

Settings> Reset to Default > Reset Local Config... is performed.

 

 

To configure the phone through the web interface:

>>Using your chosen browser, do the following:

a To get the phone’s IP address, press the Menu key, and then selecting Status > Platform > Phone. Scroll down to see the IP address.

2 - 8

Page 18
Image 18
Polycom 1725-16823-001 manual Modifying Phone’s Configuration Using the Web Interface, Polycom CMA Provisioning