Polycom 1725-16823-001 manual Connecting the Phone to the Network, 00d.html

Setting Up the Polycom VVX 1500 D Phone

c Change the phone’s configuration to use the Polycom CMA system for provisioning. Refer to Enabling Provisioning Using a Polycom CMA System on page 2-18.

	Once the VVX 1500 D phone is provisioned by a Polycom CMA system,
	future phone software upgrades are managed by the Polycom CMA
	system as well.
	Refer to Deploying the Phones Using a Polycom CMA System on page
	2-17.
Note
	You can also set up the VVX 1500 D phone in a “hybrid” system where the VVx
	1500 phones can be provisioned by both a Polycom CMA system and a
	provisioning server. In this scenario, you should review the configuration
	parameters mentioned in Configuring the Phones on page 2-4.
	For more information on configuring the Polycom VVX 1500 D phone, refer to
	the latest Administrator’s Guide for the Polycom UC Software, which is available
	at
	http://www.polycom.com/support/video/business_media_phones/vvx15
	00d.html .

Connecting the Phone to the Network

Note	Connecting the Polycom VVX 1500 D phone to the network is optional, but highly
	recommended (for the reasons discussed at the beginning of this chapter).

The following figure shows how to connect the phone to the network.

1 2

3

2 - 3