Polycom 1725-16823-001 manual For example, ftp//123.45.67.89/provisioningServer

Setting Up the Polycom VVX 1500 D Phone

For more information, refer to “Automatic Provisioning Profiles” in the Polycom CMA System Operations Guide, which are available at http://www.polycom.com/support/network/management_scheduling/cm a_4000_5000.html .

The three parameters are:

•Configuration Server URL—The IP address for the system that will provide the provisioning service.

For example, ftp://123.45.67.89/provisioningServer

•Logging Server URL—The directory to use for log files, if required. A URL can also be specified.

For example, ftp://123.45.67.89/provisioningServer/logs

•Configuration Data— XML data for a custom configuration. Allows the system administrator to provision settings that the Polycom CMA does not normally provide.

Any valid XML data from one of templates provided with the Polycom UC Software can be entered into the text box.

For example:

— To disable the picture frame feature, enter the following:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?> <!-- Generated features.cfg Configuration File --> <polycomConfig xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="polycomConfig.xsd">

<feature feature.pictureFrame.enabled="0" /> </polycomConfig>

—To update the digit map to autodial 10-digit phone numbers, four-digit direct dial extensions starting with “3”, and four-digit dial extensions starting “4” via the H.323 protocol, enter the following:

<?xml version="1.0" encoding="UTF-8" standalone="yes"?> <!-- Generated site.cfg Configuration File -->

<polycomConfig xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="polycomConfig.xsd">

<dialplan dialplan.digitmap="xxxxxxxxxx3xxx4xxxH" /> </polycomConfig>

Note	If the XML you enter is not valid, the message “Error validating XML. Configuration
	Data must be valid XML.” appears.
	The XML header may be removed, but other XML content should remain.
	Depending on the parameters entered in the configuration data text box, the phone
	may reboot or restart.
	For more configuration file examples, refer to Configuration Parameters on page
	A-2or refer to “Configuration Parameters” in the “Configuration Files” appendix of
	the latest Administrator’s Guide for the Polycom UC Software..

2 - 21