Polycom 1725-16823-001 manual Enabling Provisioning Using a Polycom CMA System

Deployment Guide for the Polycom VVX 1500 D Phone

Enabling Provisioning Using a Polycom CMA System

Note	The Polycom CMA server will auto-provision the H.323 line onto Line Key 1 on the
	VVX 1500 D phone. If there is an existing SIP line associated with Line Key 1, it will
	be overwritten. You can configure the H.323 line (auto-provisioned by the Polycom
	CMA server) to be on a specific line key by entering the value in
	prov.line.map.cma.1 . Refer to Polycom CMA Provisioning on page 2-8.
	To configure the provisioning service settings on VVX 1500 D phones:
	1. Press the Menu key, and then select Settings > Advanced >
	Admininstration Settings > Network Configuration > CMA Menu.
	You must enter the administrator password to access the network
	configuration. The factory default password is 456.
	2. Enter the following values:
	— CMA Mode: Select Static or Auto.
	— Server Address: Enter the address of the Polycom CMA system
	running the provisioning service. The address can bean IP address or
	a fully qualified domain name. For example, 123.45.67.890 .
	3. Scroll to Login Credentials and tap the Select soft key. Enter the
	following values:
	— CMA Domain: Enter the domain for registering to the provisioning
	service. For example, NorthAmerica .
Note
	If you are not using a Single Sign On login with Active Directory on the Polycom
	CMA system, the domain will be local using the local accounts created on the
	Polycom CMA server.
	— CMA User: Enter the username for registering to the provisioning
	service. For example, bsmith .
	— CMA Password: Enter the password that registers the VX 1500 D
	phone to the provisioning service (associated with the CMA user
	account). For example, 123456 .
	4. Tap the Back soft key three times.
	5. Select Save Config.
	The VVX 1500 D phone reboots.
	You can confirm the connection to the Polycom CMA system by:
	— Reviewing the log files on the provisioning server. Look for entries
	like:
	000108.554cfg 200RTEnterprise Credentials waiting
	to acquire mutex <0x1b> timeoutValue <25> ticks

2 - 18