SpectraLink 8002 Wireless Telephone Overview

Startup Sequence

 

 

 

The SpectraLink 8002 Wireless Telephone goes through an

 

 

 

initialization sequence at startup. The line icons 1-9 display and count

 

 

 

down as the handset steps through this sequence. This is usually very

 

 

 

rapid. If there is difficulty at any step that prevents initialization from

 

 

 

continuing, an error message will display and the related icon(s) will

 

 

 

stay on. Please see the error table at the back of this document for

 

 

 

instructions on how to handle error messages that occur during

 

 

 

initialization.

 

 

 

 

 

Icon

 

The icon(s) shown in bold turns off when:

 

 

 

 

123456789

 

The handset has located and authenticated and associated with at least one AP, and is

 

 

 

proceeding to bring up higher-layer networking functions.

 

 

 

12345678

 

The handset is either configured for Static IP, or if configured for DHCP, the DHCP

 

 

 

discovery process has started.

 

 

 

1234567

 

If DHCP is configured, a DHCP response was received which contains a good DNS

 

 

 

server configuration.

 

 

123456

Indicates Static IP configuration.

 

 

 

12345

 

All networking functions are complete (notably, DHCP) and the handset is establishing

 

 

 

its connection to the LAN.

 

 

 

1234

 

The LAN connection is complete.

 

 

 

123

 

The handset has located a generic SIP config file.

 

 

 

12

 

The handset has located a handset-specific SIP config file.

 

 

 

 

 

(no icons)

 

Handset is attempting to register each of the specified line contacts.

 

Registering

 

 

 

 

 

 

 

(no icons)

 

Handset has registered with at least one contact on one proxy server. Initialization is

 

EXT.

 

 

 

complete. The handset is in standby mode ready to receive and place calls. The line one

 

XXXXX

 

 

 

contact is displayed.

 

 

 

 

 

 

 

 

 

 

During the last three steps of this process, the handset contacts the SIP

 

 

 

TFTP server and downloads general information about the proxy

 

 

 

server(s), downloads specific information pertaining to the handset,

 

 

 

registers with the proxy server(s), and verifies handset credentials.

 

 

 

Once this process is complete, the handset is ready to use.

PN: 1725-36034-001_C.doc

19

Page 19
Image 19
Polycom 8002 manual Startup Sequence, Icon Icons shown in bold turns off when, Ext, Xxxxx