SpectraLink 8002 Wireless Telephones Configuration and Administration (SIP)
Phone Config
License Option
The License Option indicates the VoIP protocol that your site is licensed to download and run. The SIP protocol used for the SpectraLink 8002 Wireless Telephones requires license option selection 22. Any other protocol will cause the handset to malfunction.
The handset will give you a No SVP Response error if the License Option is not set to 22. Be sure to set this option immediately, before trying to associate the handset with an access point.
SIP Registration
Individual handsets can be configured to correspond with a handset- specific configuration file in the TFTP server. The handset is then automatically identified at startup.
If the username and password information is not configured in the Admin menu, then this information will be requested at startup. The username and password entered must agree with a corresponding
Reg 1 and Login allows you to specify a username and password for automatically acquiring SIP configuration information. If no username is specified, the SIP handset will request username and password at startup and any additional registrations specified here are ignored.
The username should correspond to the primary (line 1) dial number assigned to the user. The username and password should also correspond to the authentication credentials as created by your system administrator for your primary line registration. Usernames or passwords can be erased by selecting the item, then pressing Bksp softkey and then Save softkey.
Reg 2, Reg 3, and Reg 4 allow you to specify additional authentication usernames and passwords that may be required by your handset for any additional line appearances (registrations) that may appear in the specific user’s configuration file. This information will be ignored if a Reg 1 and Login username is not provided.
26 | PN: |
