Polycom 8002 Diagnostics

SpectraLink 8002 Wireless Telephone Configuration

PN: 1725-36034-001_C.doc 33

Preferred Channel

The Preferred Channel option lists the channels that are permitted

within the regulatory domain previously set. To speed up handoff,

the handset will look for APs on the preferred channel list first. If no

AP is found, the handset will then will look for APs on the non-

preferred channels. Selected channels are marked with an asterisk.

You may select more than one channel.

Diagnostics

Run Site Survey

The Site Survey mode is activated by selecting this option. The site

survey starts running immediately upon selecting this option. See

Chapter 5 Diagnostic Tools for more information about site survey.

Diagnostics Mode

See Chapter 5 Diagnostic Tools for a detailed explanation of the

Diagnostics Mode options.

Syslog Mode

See Chapter 5 Diagnostic Tools for a detailed explanation of the Syslog

Mode options.

Restore Defaults

The Restore Defaults option will set all user and administrative

parameters except License Option to their factory defaults.

Contents

Main Trademark Information Patent Information Copyright Notice Notice Contact Information Essential Installation Pointers You must update the software with the most recent code. WMM QoS must be supported and enabled on the Wi-Fi access point(s). Data APs may not support VoWiFi. A TFTP server must be on the local network with the SIP configuration files present. Page About this Guide Polycom Model Numbers Related Documents Customer Support Hotline Icons and Conventions Contents 0 1 2 3 4 5 6 7 Page Page SpectraLink Wireless Telephone Overview WMM-Compatible Access Points Security Options Quick Start Guide Page System Diagram TFTP server Ethernet switch Ethernet cable System Components SpectraLink 8002 Wireless Telephone Access points Ethernet switch SIP server SIP phone TFTP server SIP TFTP server Handset Specifications Startup Sequence Page SpectraLink 8002 Wireless Telephone Configuration The Admin (Administration) Menu Opening the Admin menu Entering and editing Admin menu options Alphanumeric string entry Page Admin menu Page Phone Config License Option SIP Registration OAI On/Off Admin Password Network Config IP Address Page Page ESSID Security Regulatory Domain Transmit Power Preferred Channel Diagnostics Run Site Survey Diagnostics Mode Syslog Mode Restore Defaults User-defined Preferences (Standby Menu) Standby mode, options menu Standby menu Page Lock Keys Ring Options Telephone Ring Auxiliary Ring 1 and Ring 2 Phone Options Noise Mode Key Tones Warning Tones Display Contrast System Info Page Software License and Protocol Management Requirements Configuration Process Page Page Programming the SIP Handset Features SIP TFTP Server Configuration Files Guidelines The generic file (sip_allusers.cfg) The handset-specific files (e.g. sip_3001.cfg) Proxy server commands Page Page Page Sample Configuration Files SIP_allusers.cfg Page Page Sample handset-specific file Page Page Using the SIP Handset The Handset Display Overview Line indicators Handset icons Signal strength Battery charge Voicemail Download Handset modes Standby mode (on-hook) Active mode (off-hook) Messaging mode Softkeys Page Menus Line menu Favorites menu FCN menu MENU display Handset Operation Alphanumeric dialing Feature activation Page Page Page Page Page Testing a Handset Page Diagnostic Tools Site Survey Page Page Solving coverage issues Diagnostics Mode Screen 1 Screen 2 Screen 3 Screen 4 Screen 5 Syslog Mode Page Page Page Certifying the Installation Conducting a site survey Page Software Maintenance Upgrading handsets Normal download messages When the update is complete, the handset displays the extension number, and is ready for use. Download failure or recovery messages Troubleshooting Access point problems In range/out-of-range Capacity Configuration problems Handset Status Messages Page Page Page Page Page Page Page Appendix A: Regulatory Domains Page Index