Polycom 8002 About this Guide

PN: 1725-36034-001_C.doc 5

About this Guide

This document explains how to configure and maintain the

SpectraLink 8002 Wireless Telephones with Session Initiation Protocol

(SIP); a protocol for the control of voice over IP (VoIP) calls.

Polycom Model Numbers

This document covers the following registered model number:

SNP2400

Related Documents

SpectraLink 8002 Wireless Telephone and Accessories User Guide.

(1725-36027-001)

SpectraLink 8002 Wireless Telephone Quick Reference Guide

(1725-36026-001)

SpectraLink 8002 Wireless Telephone Deployment Guide

(1725-36166-001)

Available at http://www.polycom.com/usa/en/support/voice/wi-

fi/spectralink_8002_wireless.html.

Open Application Interface (OAI) Specification

(72-0052-00)

Technical specifications available by request.

Please contact Customer Support.

Contents

Main Trademark Information Patent Information Copyright Notice Notice Contact Information Essential Installation Pointers You must update the software with the most recent code. WMM QoS must be supported and enabled on the Wi-Fi access point(s). Data APs may not support VoWiFi. A TFTP server must be on the local network with the SIP configuration files present. Page About this Guide Polycom Model Numbers Related Documents Customer Support Hotline Icons and Conventions Contents 0 1 2 3 4 5 6 7 Page Page SpectraLink Wireless Telephone Overview WMM-Compatible Access Points Security Options Quick Start Guide Page System Diagram TFTP server Ethernet switch Ethernet cable System Components SpectraLink 8002 Wireless Telephone Access points Ethernet switch SIP server SIP phone TFTP server SIP TFTP server Handset Specifications Startup Sequence Page SpectraLink 8002 Wireless Telephone Configuration The Admin (Administration) Menu Opening the Admin menu Entering and editing Admin menu options Alphanumeric string entry Page Admin menu Page Phone Config License Option SIP Registration OAI On/Off Admin Password Network Config IP Address Page Page ESSID Security Regulatory Domain Transmit Power Preferred Channel Diagnostics Run Site Survey Diagnostics Mode Syslog Mode Restore Defaults User-defined Preferences (Standby Menu) Standby mode, options menu Standby menu Page Lock Keys Ring Options Telephone Ring Auxiliary Ring 1 and Ring 2 Phone Options Noise Mode Key Tones Warning Tones Display Contrast System Info Page Software License and Protocol Management Requirements Configuration Process Page Page Programming the SIP Handset Features SIP TFTP Server Configuration Files Guidelines The generic file (sip_allusers.cfg) The handset-specific files (e.g. sip_3001.cfg) Proxy server commands Page Page Page Sample Configuration Files SIP_allusers.cfg Page Page Sample handset-specific file Page Page Using the SIP Handset The Handset Display Overview Line indicators Handset icons Signal strength Battery charge Voicemail Download Handset modes Standby mode (on-hook) Active mode (off-hook) Messaging mode Softkeys Page Menus Line menu Favorites menu FCN menu MENU display Handset Operation Alphanumeric dialing Feature activation Page Page Page Page Page Testing a Handset Page Diagnostic Tools Site Survey Page Page Solving coverage issues Diagnostics Mode Screen 1 Screen 2 Screen 3 Screen 4 Screen 5 Syslog Mode Page Page Page Certifying the Installation Conducting a site survey Page Software Maintenance Upgrading handsets Normal download messages When the update is complete, the handset displays the extension number, and is ready for use. Download failure or recovery messages Troubleshooting Access point problems In range/out-of-range Capacity Configuration problems Handset Status Messages Page Page Page Page Page Page Page Appendix A: Regulatory Domains Page Index