Polycom manual Pairing the Polycom CX400 Handset and Cradle

Getting Started with Your Polycom® CX400 Cordless Phone

2.Place the handset into the cradle.

While the phone is charging, the cradle’s left-hand charging LED is steady red and, if the handset is turned on, the handset status LED is green. When the phone is completely charged, the cradle’s charging LED turns off. This may take 1 to 2 hours or more. The handset status LED stays green as long as the handset is on and the battery retains a charge.

Note When the handset status LED is flashing red, return it to the cradle to recharge.

You may proceed to the next section, Pairing the Polycom CX400 Handset and

Cradle, without waiting for the handset battery to fully charge.

Pairing the Polycom CX400 Handset and Cradle

The process of pairing the handset and cradle associates a specific handset with a specific cradle. This avoids interference when several Polycom CX400 cordless Phones are used within range of one another.

The right-hand green LED on the front of the cradle indicates whether the handset is paired with the USB cradle. The mapping is:

•Steady green—Paired

•Fast flashing green—Waiting for pairing

•Slow flashing green—No radio frequency link established (The handset may be turned off or may be out of range of the cradle.)

1 - 5