Entering the Safety Code
The treadmill provides a safety code to help prevent unauthorized use. When you initially assemble the treadmill, the safety code is disabled. To enable it, refer to the instructions found in Changing Treadmill Settings.
If you are prompted for a safety code, press the following number sequence: 1, 2, 3, 4.
Turning the Unit On and Off
To turn the unit On and Off, use the power switch located at the front of the unit, near the power cord connection. Refer to Diagram 5.
Important: When it is not being used, turn the unit Off.
An asterisk appears on the display with each key press. If a
key is not pressed within 30 seconds or the correct safety 
code is not entered within two minutes, the banner appears
on the display and the running belt does not move. 
Important: Do not assume the treadmill is safe because of
safety code protection. Never leave children unsupervised | Power switch |
| |
around the treadmill. Always turn Off and unplug the | Diagram 5: Power switch |
treadmill when it is not in use. |
|
Using the Handrails
To maintain your balance, always grasp a handrail extension when you step on or off the treadmill, and when you use the keypad.
To learn more about the
Location
It is important to keep the area around the treadmill open and free from encumbrances such as other equipment. The minimum space requirement needed for user safety and proper maintenance is three feet wide by six feet deep (one meter wide by two meters deep), directly behind the running belt.
Owner’s Manual: Treadmill Safety Features | 10 |
