TOC | INDEX |
TOF. Decrease the Top of form by 10. This will cause the printer to start printing before the label and ensure a fully printed label.
1Decrease TOF by 10
Actual Label Stock
Size = 2” x 2”
2 Decrease Left Margin | 3 Over Bleed Page Size |
Offset by 12 | 2.1” x 2.1” (.1 Inch) |
Note: It is best to over bleed as little as possible to avoid excess ink on the label backing. Also, over bleeding too much will cause the printer to skip labels. This is because the printer stops printing too late to sense the next label.
F. PRINTER DRIVER SETTINGS
Once the printer driver has been successfully installed, you will need to setup the driver with the appropriate print options. Refer to the following steps to change or verify your default printer driver preferences. These settings will apply to all new designs created in NiceLabel or other programs after the preferences were changed. Existing labels saved in NiceLabel will not be affected since the preferences are saved with the label. To change these preferences you will have to change printer preferences through NiceLabel. (File Menu - Printer Settings)
40Printing
