TOC | INDEX |
3.Remove any shipping tape from your label stock roll to ensure that it can unroll freely, making certain that no adhesive portion is exposed. It is important to note that any exposed adhesive surface can attach itself the inner workings of the print mechanism and cause a media jam.
4.Place your roll of label stock on the Roll Arm and push it inward until it touches the Roll Stop.
Roll Stop
Roll Guide | DO NOT PINCH |
|
Roll Arm
5.Flip up the Roll Guide and slide it inward until it touches the label stock. The Roll Guide will automatically pull back slightly to the correct position. There should be approxi- mately a 1mm gap between the roll guide and the roll.
Important Note: Be aware that some label stock may have a core that is slightly too large for the roll or the labels may have wrapped unevenly causing some to stick out beyond the edge of the core. Both of these issues can cause feeding problems.
6.Pull the Movable Throat Guide outward to make room for the label stock.
10Label Stock
