TOC | INDEX |
Best for Photos mode is best used for photographic images where accurate color reproduction is very essential. Images printed in this mode will look lighter than those printed in Photo mode. Skin tones especially will look more natural in this mode.
NOTE: Exact color matching of the printed labels to the screen may never be possible since there are factors that affect this out of the drivers control. The surface of the label reacts with the ink in the cartridge to produce the color. For this reason, when printing the same image to different types of labels with different surfaces the printed output can look entirely different.
Ink Saturation
This option controls the amount of ink used when printing an image. The default setting is 100%, which will provide the most accurate color matching. If the ink is not drying fast enough or bleeding, you can decrease the Ink Saturation to lessen the amount of ink that is applied to the label.
Enable
This setting defaults to “Yes” for fastest bidirectional printing.
Stock Sensor Mode
Click this setting to open the Status Monitor. See Section 2D
Output Mode
Click this setting to open the Status Monitor. See Section 2E
Print Alignment
Click this setting to open the Status Monitor. See Section 4D
Cartridge Maintenance
Click this setting to Align the Printhead, Clean the Printhead or Change a Cartridge. This setting opens the Status Monitor.
44Printing
